"Rain to Mains" diversion pumps
 |
 |
 |
| Universal Flick | Onga Waterswitch | Davey Rainbank |
Select from the brands above for quality rainwater pumps with mains-water backup.
Universal "Flick" system
 |
Flick is an automatic mains water back up device used for rainwater harvesting systems. It will optimise collected rainwater, when available and default to a mains water source if tank water is not available or should there be a pump or power failure. Flick is suitable for both surface mounted and submersible pumping applications. |
Product Features
• Capable of full main pressure delivery, not reliant on the pump pressure being higher than the mains.
• Pump protection built in, the unit will cross check flow after pump initiation, and if not present the pump power will be isolated. This protects the pump in the event of poor installation or float switch fault.
• Can be used with any pump that delivers sufficient head.
• Variable speed pump drive, this reduces pump cycling when consumer demand is low.
• One piece moulded flow path design, meaning less leakage points. The water course is part of the casing.
• The unit is not constructed from off the shelf components
• Positive selection between mains and tank water. No shandying that occurs with some other products. If tank water is available, this is what is delivered.
• Performance is 60 litres per minute at 850kpa static pressure.
• Fully watermarked.
• Competitively priced.
• Suitable for both surface mounted and submersible pumping applications.
Connection Requirements
• Power requirements - 220V 50 Hz
• Water connection - 3/4" bsp female threads.
• Maximum pressure rating - 850kpa
